FANDOM


The calculated carbon aromaticity index (CCAI) is an index of the ignition quality of residual fuel oil.

The running of all internal combustion engines is dependent on the ignition quality of the fuel. For spark-ignition engines the fuel has an octane rating. For diesel engines it depends on the type of fuel, for distillate fuels the cetane numbers are used. Cetane numbers are tested using a special test engine and the existing engine was not made for residual fuels. For residual fuel oil two other empirical indexes are used: CCAI and Calculated Ignition Index (CII). Both CCAI and CII are calculated from the density and kinematic viscosity of the fuel.

DefinitionEdit

Formula for CCAI:

CCAI=D-140.7 \log (\log (V+0.85))-80.6-210 \ln \left (\frac{t+273}{323} \right )

which is equivalent to:

CCAI=D-140.7 \log (\log (V+0.85))-80.6-483.5 \log \left (\frac{t+273}{323} \right )

Where:
D= density at 15°C (kg/m3)
V= viscosity (cST)
t = viscosity temperature (°C)

UseEdit

This will normally give a value somewhere between 800 and 880. The lower the value is the better the ignition quality. Fuels with a CCAI higher than 880 are often problematic or even unusable in a diesel engine. CCAI are often calculated under testing of marine fuel.

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.